10 Courses / 12 Classes found

Search Results

AIT112: Natural Gas Pipeline Operations – 3 credits

Introduction to the fundamentals of the natural gas pipeline operations. Includes topics such as damage prevention, emergency response, valve operation, and testing of facilities. This course prepares students for the Non-Joiner Operator Qualification in the natural gas pipeline industry. Prerequisites: None.

Class# Location Delivery Dates Days Times Instructors Availability
32682
Estrella Mountain
WestMec SW Room B-114
In Person
08/2512/19
Fall 2025
M
6:00PM – 8:40PM
  • Staff
Open
11 of 16 seats available
    • Notes: Class 32682 meets at WestMec SW Room B-114 Mondays from Aug 25 to Dec 19, 2025 from 6:00PM - 8:40PM
      Class 32682 also meets at WestMec SW Room B-219 Mondays from Aug 25 to Dec 19, 2025 from 6:00PM - 8:40PM
      Class meets at the EMC Western Maricopa Education Center (WestMEC) SouthWest Campus located at 500 N. Verrado Way in Buckeye, AZ 85326.
  • No books listed at the bookstore, contact instructor

AIT117: Introduction to Data Center Operations – 3 credits

Provides the foundational aspects of data center fundamentals, data center compliance, operations, and physical infrastructure. Introduces mission critical operations (MCOs) as they apply to data centers. Includes an overview of the physical components of a data center, its interoperability, and the usage of data center equipment. Prerequisites: None.

Class# Location Delivery Dates Days Times Instructors Availability
10828
Estrella Mountain
Estrella Hall LibraryInst S135
Hybrid
08/2512/19
Fall 2025
W
4:30PM – 7:30PM
  • J. Kenser
Open
2 of 15 seats available
  • No books listed at the bookstore, contact instructor
24883
Mesa: Dobson Campus
TC 404
Hybrid
08/2812/19
Fall 2025
Th
4:25PM – 7:25PM
  • K. Ellison
Open
6 of 15 seats available
    • Notes: This hybrid class includes a face-to-face format at the designated campus or at a Data Center site at the time listed in the class schedule. Up to four (4) classes will be held at Data Center sites and students must provide their own transportation to both the campus and Data Center sites.

      The other part will be held online either without a set time to attend or a Live Online session. Students enrolling in a hybrid class acknowledge they already possess the skills described in the Minimum Computer and Technology Requirements at https://www.mesacc.edu/online/get-started for additional information.
      Zero-Textbook-Cost Class: The total cost of required online instructional materials for this "Z Class" is $0.
      Open Educational Resources (OER) are learning, teaching, and research materials in any format and medium that reside in the public domain or have an open license copyright that permits no-cost access, re-use, re-purpose, retention, redistribution, and adaptation by others.
      Class 24883 Students may contact instructor at: kendall.ellison@mesacc.edu
  • No books listed at the bookstore, contact instructor

AIT123: J-STD Soldering Certification – 3 credits

This course will prepare the successful student to receive the "Certified IPC Specialist" (CIS) certification from The Institute for Interconnecting and Packaging Electronic Circuits (IPC) in "Requirements for Soldered Electrical and Electronic Assemblies" (IPC J-STD-001). Topics covered and skills to be demonstrated are: soldered wires and terminals, through hole connections, surface mount components, and inspection. Certification is verified by a certified IPC trainer (CIT). Prerequisites: Permission of Instructor.

Class# Location Delivery Dates Days Times Instructors Availability
23694
Mesa: Dobson Campus
BA 11S
Hybrid
08/2610/16
Fall 2025
Tu,Th
4:25PM – 7:55PM
  • J. Johnston Graham
Open
5 of 10 seats available
  • Costs include AIT Course Fee: $150.00
    • Notes: Hybrid classes include face-to-face format on campus at the time listed in the class schedule. The other part will be held online either without a set time to attend or a Live Online session.

      Students enrolling in a hybrid class acknowledge they already possess the skills described in the Minimum Computer and Technology Requirements at https://www.mesacc.edu/online/get-started for additional information.
      Class 23694 Students may contact Career Navigator at: azami@mesacc.edu. This is a 8 week course. Department consent required.
      Class 23694 Prospective students must complete pre-assessment at: https://info.maricopacorporate.com/jstandard-preassessment.
      Class 23694 costs include AIT Course Fee: $150
  • No books listed at the bookstore, contact instructor

AIT125: DC and AC Components and Circuits – 3 credits

An introductory course in Alternating Current (AC) and Direct Current (DC) electric theory. Includes electric circuits using resistors, capacitors and inductors. Also includes solenoids, relays, transformers, basic DC and AC motors, circuit protection devices and a variety of switches.
Prerequisites: None.

Class# Location Delivery Dates Days Times Instructors Availability
34220
Mesa: Dobson Campus
TC 404
Hybrid
09/0312/19
Fall 2025
W
12:00PM – 12:50PM
  • B. Green
Open
12 of 12 seats available
  • Costs include AIT Course Fee: $45.00
    • Notes: Students may contact instructor at: brian.green@mesacc.edu
      Class 34220 costs include AIT Course Fee: $45
    • Lab Notes: Students enrolling in class 34220 must also enroll in the following lab:
      Class 34221 held Wed from 1:00PM to 3:30PM at TC 404 (B. Green)
  • No books listed at the bookstore, contact instructor

AIT127: Power Plant Components – 3 credits

Theory, construction and application of basic power plant mechanical components. Basic concepts of electrical fundamentals and electronics discussed.
Prerequisites: None.

Class# Location Delivery Dates Days Times Instructors Availability
32681
Estrella Mountain
WestMec SW Room B-111
In Person
08/2812/19
Fall 2025
Th
6:00PM – 8:40PM
  • W. Drey
Open
15 of 24 seats available
    • Notes: Class meets at the EMC Western Maricopa Education Center (WestMEC) SouthWest Campus located at 500 N. Verrado Way in Buckeye, AZ 85326.
  • No books listed at the bookstore, contact instructor

AIT128: A-620 Cable and Wire Harness Assembly Certification – 3 credits

This course will prepare the successful student to receive the "Certified IPC Specialist" (CIS) certification from The Institute for Interconnecting and Packaging Electronic Circuits (IPC)/Wire Harness Manufacturer's Association (WHMA) in "Requirements and Acceptance for Cable and Wire Harness Assemblies" (IPC/WHMA-A-620 Certification). Topics covered and skills to be demonstrated are: soldered terminations, crimp terminations, insulation displacement terminations (IDC), splices, connectorization, marking/labeling, coaxial cable assemblies, electrical shielding, wire marking and labeling, and testing methodologies. Certification is verified by a certified IPC trainer (CIT). Prerequisites: None.

Class# Location Delivery Dates Days Times Instructors Availability
23574
Mesa: Dobson Campus
BA 12S
Hybrid
09/2210/03
Fall 2025
M,Tu,W,Th,F
3:00PM – 6:55PM
  • T. Ray
Open
12 of 12 seats available
  • Costs include AIT Course Fee: $150.00
    • Notes: Hybrid classes include face-to-face format on campus at the time listed in the class schedule. The other part will be held online either without a set time to attend or a Live Online session.

      Students enrolling in a hybrid class acknowledge they already possess the skills described in the Minimum Computer and Technology Requirements at https://www.mesacc.edu/online/get-started for additional information.
      Class 23574 Students may contact Career Navigator at: azami@mesacc.edu. This is a 9-day boot camp. Department consent required.
      Class 23574 Prospective students must complete pre-assessment at: https://www.mesacc.edu/workforce-development/azami/cable-harness-wiring-boot-camp/industry-required-assessment
      Low-Textbook-Cost Class: The total cost of the required materials for this course is $40 or less.
      Class 23574 costs include AIT Course Fee: $150
  • No books listed at the bookstore, contact instructor

AIT205: Power Electronics and Variable Frequency Drives – 3 credits

Introductory course in AC and DC power electronic theory. Includes power supplies, power conditioning, solid-state power devices, and power control circuits. Also includes proximity sensors, analog thermal sensors, control feedback loops, and the setup and operation of Variable Frequency Drives (VFDs). Prerequisites: A grade of C or better in AIT125, or permission of Instructor.

Class# Location Delivery Dates Days Times Instructors Availability
24696
Mesa: Dobson Campus
TC 404
Hybrid
08/2612/16
Fall 2025
Tu
12:25PM – 1:25PM
  • B. Green
Open
4 of 12 seats available
  • Costs include AIT Course Fee: $45.00
    • Notes: Class 24696 Students may contact instructor at: brian.green@mesacc.edu
      Class 24696 costs include AIT Course Fee: $45
    • Lab Notes: Students enrolling in class 24696 must also enroll in the following lab:
      Class 24697 held Tue from 1:35PM to 3:55PM at TC 404 (B. Green)
  • No books listed at the bookstore, contact instructor

AIT227: Power Distribution Systems – 3 credits

Introduces transmission and distribution of electrical power. Includes application of transformers, distribution and over-current protection devices, switchboards, feeders, bus-ways, motor control centers, generators, and troubleshooting techniques associated with these systems and devices. Prerequisites: A grade of C or better in AIT125.

Class# Location Delivery Dates Days Times Instructors Availability
32786
Mesa: Dobson Campus
TC 412
Hybrid
08/2512/19
Fall 2025
M
4:25PM – 5:15PM
  • B. Green
Open
3 of 10 seats available
  • Costs include AIT Course Fee: $55.00
    • Notes: Students may contact instructor at: brian.green@mesacc.edu
      Class 32786 costs include AIT Course Fee: $55
    • Lab Notes: Students enrolling in class 32786 must also enroll in the following lab:
      Class 32787 held Mon from 5:20PM to 8:55PM at TC 412 (B. Green)
  • No books listed at the bookstore, contact instructor

AIT275: Robotics II – 3 credits

Intermediate principles of working safely with robots; robot auxiliary, subsystems, and components. Includes robot maintenance, troubleshooting and repair. Integrates a basic robot design project. A grade of C or better required in all Prerequisites. Prerequisites or Corequisites: AIT270.

Class# Location Delivery Dates Days Times Instructors Availability
32788
Mesa: Dobson Campus
TC 412
Hybrid
10/2312/19
Fall 2025
Th
4:25PM – 5:15PM
  • K. Hackler
Open
2 of 10 seats available
  • Costs include AIT Course Fee: $100.00
    • Notes: Students may contact instructor at: kennith.hackler@mesacc.edu
      Class 32788 costs include AIT Course Fee: $100
    • Lab Notes: Students enrolling in class 32788 must also enroll in the following lab:
      Class 32789 held Thu from 5:25PM to 8:45PM at TC 412 (K. Hackler)
  • No books listed at the bookstore, contact instructor

AIT291: Automated Industrial Technology Internship – 3 credits

Supervised work experience in production environments. Includes experiences in maintenance, troubleshooting, repair of production environment and specific manufacturing processes. Also includes experiences in problem solving; working as a team; soft skills; time and resource management; and exposure to specific manufacturing processes. Prerequisites: A grade of C or better in AIT225, or permission of Instructor or Corequisites: AIT225.

Class# Location Delivery Dates Days Times Instructors Availability
33473
Estrella Mountain
Independent Study
Independent Study
08/2512/19
Fall 2025
N/A
N/A
  • S. Denny
Open
10 of 10 seats available
  • No books listed at the bookstore, contact instructor
24488
Mesa
Online Course
Online
08/2512/19
Fall 2025
N/A
N/A
  • K. Hackler
Open
8 of 12 seats available
    • Notes: This is an Online class that does not meet at specific class times. Students are required to have access to a computer or mobile device, and Internet access, unless otherwise specified.

      Before enrolling in their first online class at MCC, students need to view the online orientation and complete the readiness survey on https://www.mesacc.edu/online/get-started for additional information.
      Class 24488 Students may contact instructor at: kennith.hackler@mesacc.edu
  • No books listed at the bookstore, contact instructor